Posts Tagged ‘creative mindset’
Put your Brain to work
Put your Brain to work
Your brain is a powerful thing. You hear this all the time but you forget just how amazing it is. Everything that has ever been accomplished has started as an idea or a problem to solve in the brain. Before I go off on a complete tangent I wanted to share some new ideas to boost your creativity.
I was talking to a friend who is awaiting confirmation on a release of one of his tracks on Richie Hawtin’s Minus label (fingers crossed). We’ve talked a few times about our approaches to music & productivity in general & we tend to both shy away from getting overly technical in our conversation. Instead we discussed training your brain for creativity & finishing what we’ve started as 2 of the most important skills to develop.
This friend of mine (who I may introduce to you in a later blog), has zero equipment besides his Mac. No outboard gear, no controllers. Just Ableton Live, Operator, 1 or 2 other synths…… and his brain. Imagine that, a guy with minimal equipment making minimal tracks 
This proves that you could make and release quality music without having to buy all kinds of equipment, but that’s another blog….
So instead of talking about how he makes his songs specifically, I want to share with you his creative approach. He is already a successful guy in a non-music industry, so he uses his idea generating & problem solving skills from one industry to the next. Ever notice that some people are successful in most everything they touch? I think there is something to the way these people think.
This is the simple approach:
1. Have a notepad & recorder with you at ALL times. For many of us, we have this all in our iPhone. When you make an intention to record your ideas, your brain tends to give you more ideas. The more you take notes, write down lyric ideas, mixing & structuring ideas or melodies, the more your brain will feed you. I tend to use iPhone’s notepad & email the note to myself. I use an ap called Record for all my melodic & rythmatic ideas as well as field recordings. I also keep a notepad available to write things down. Usually when I’m making lists. It doesn’t really matter what you use. It’s more important to just try it, you’ll be pleasantly surprised!
2. Treat your brain like a well respected & trusted employee. Your brain is really only limited to what you feel it’s capable of. Put it to the test. My approach is to throw a creative or technical problem at it to solve before you go to sleep. You’ll be surprised how often you come up with solutions by morning or within a couple days. I’d suggest starting small, just so you build a bit of confidence but once you get the hang of it, you can give it bigger & bigger tasks. Before you go to sleep, create a picture in your mind of the problem you’re facing solved & then let it go. When you sleep, you tap into some serious resources that simply aren’t available in your waking life.
3. Dream Log: Although this is completely not neccesary, I do my best to remember & write down my dreams, even if they seem irrelevant. The reason I do this, is that it trains your brain to tap into your dream state resources while you’re awake. I think that is the point where fresh new ideas flow the best.
I could probably go on and on with more tips related to these 3 but I’d prefer to stop right there and let you put these to use asap. I’d love to hear your results as well as ways you use to put your brain to work!
Happy music making,
Jason
P.S. – Don’t forget to comment & tweet (down below) & “like” (up above).All your feedback & support is appreciated!
How to create a Drum kit Selector in Ableton’s Drum Racks
How to create a Drum kit Selector in Ableton’s Drum Racks
The title of this blog might seem a bit confusing for some of you. Don’t worry, all will soon be explained.
In the past, when I used to make drum beats on a drum machine, it was pretty easy to assign specific sounds to each drum pad, thus quickly building a drumkit that fits my current songwriting mood. These days you have some advantages and disadvantages when it comes to drums when using your computer. On the plus side, it’s pretty easy to make unlimited drum kit presets in Ableton from a nearly unlimited library of samples. On the down side, none of these kits are guaranteed to have the exact sounds you want from the get go. Also, having too many choices can slow you down from what is most important. Making music.
This is where my current solution comes in
I’ve discovered a clever way to make a single drum rack instrument that is immediately customizable. You simply assign a few simple Macro knobs and you can select the perfect kick, snare, hi hat or pretty much anything else you can think of. This gives you an immediate hands on approach to building your perfect kit on the fly.
Below is a video showing you how it works:
For those of you interested in the drumkit in this video as well as drum racks kits for over 70 Vintage Drum Machines, look no further than my new sample collection. It really has about everything you would need to make any electronic style you want. There is a full Vintage drum machine list at the link below:
Ultimate Drum Machine Sample Collection
Happy Music Making,
Jason
P.S. – Don’t forget to comment & tweet (down below) & “like” (up above).
All your feedback & support is appreciated!
I recommend the sites below:
Logic Courses
Reason Courses
How I Write Songs
How I Write Songs
I wanted to share my process for writing a song from scratch. I’ve gone pretty deep into this with my 30 day Ableton Production Journal but those of you who haven’t purchased it are still left in the dark. Plus I figure if I could give a breakdown of my process, it might help people save some time making their own songs. Some of this might be a bit technical and understanding it might push you to research further in Ableton or google. I’m not purposely trying to confuse anyone but rather wanting to go through my basic process in an unedited way. I’ll do my best to be clear.
Blank Slate:
This is pretty much how it all starts. For me, I rarely have “go to” sounds or templates set up. I probably should in some cases, but I usually can’t be bothered. Besides, it doesn’t take long to set things up. I’ll usually drag a reverb and a delay onto the 2 default return tracks. I’ll add another return track for Compression. This will be used for Parrallel or “New York” compression, which is basically mixing the fully compressed sound with the original. This has the advantage of adding punch and fatness without losing the transients. You also have control over how much you want to add to any of your tracks.
After adding the return tracks, I’ll usually drop a Drum Racks kit into a track to make a basic beat. I dial the sounds in as I go but I usually want to find a groove with a good set of sounds. Again, although I do have custom kits, I don’t have any “go to” sounds. I just keep testing sounds until something catches my attention. Once I have a working beat, I’ll dial in the volumes, attack, decay and release on each sound. I’ll use compression to try to get the most out of kicks and snares. I’ll also drag in a reverb as a return within drumracks. What is great about Ableton is that I’m able to do anything with each sound within drumracks as I would be able to do on any regular track (and that is ALOT).
I also have Drum Racks kits that are strictly hi hats, or snares, or kicks. I may find myself dragging several more tracks or drums to layer with the original kit. Usually 2-3 sounds make up a kick or snare that I’m happy with, typically choosing which sound has the best low end and which have the snap or high end. I’ll then EQ out the low end of the sample that doesn’t need it. Sometimes I’ll use a low pass filter as well to purposely take off some of the high end frequencies, giving the drums a darker or more dubby sound. Other times I’ll enhance the the highs for a more agressive sound. It all depends.
Bass
Next I’ll dive into bass. Sometimes I know exactly what I’m looking for, but usually I haven’t got a clue and I need to find the right sound before I know what to do with it. Depending on whether I want a more analog or digital tone I may look toward a virtual Moog, Juno or Ableton’s own Operator or Analog. Since I know Operator pretty well, it’s easier for me to dial in a sound from scratch than with most other synths. With the other synths, I rely a bit on presets as a starter point and the tweak to taste. Another great bass tool is Spectrosonic’s Trilogy. A huge range of great acoustic and electronic sounds. With some groove quantizing and good programming, you can get some pretty believable sounds. If I am not already using a simple sine wave, I’ll usually add an Operator just for the purpose of Sub bass. Then I’ll back off the low frequencies of the other synth. I may also back off the highs of the bass so it’s not too aggressive. If i later need more “bite” I may duplicate the synth and pitch it up an octave, knock out most of the lows and mids and add a bit of distortion or saturation. I usually can keep this layer quite low and it’ll still have an impact on the overall sound. You can duplicate again and add another layer pitched up 3 or 7 semitones to create a harmonic if you want. I’ve found this to give me a far more exciting sound at times.
For drums and bass, I’ll usually create a group for each and add a subtle compression (2:1 or 2.5:1) just to make things gel together. I rarely add reverb to my bass or the kick drum, but certainly use it lightly on other drum sounds if it helps to add depth. With Drums, I find it important to have a combination or wet and dry sounds. The dryer sounds being the ones you want to stand out while the others play more of a support role. I’ll also try to remove any “mud” in my bass or drum sounds. I use a highpass filter to knock out anything unneccesary. I also will put a dip in the 350hz-650hz range to sharpen some sounds. This range tends to by where “mud” lives. A little subtractive EQ goes a long way.
Tuning
The next step I might take after getting my bass sounding good is to tune my drums to the bass. This is easier than it might sound and there are a couple approaches that work for me. The one I use most is using an EQ8 effect and sweeping the frequency with a thin Q and alot of gain until the sound rigs in harmony. Then I’ll back off the gain so that the tuning is a bit more hinted instead of in your face. I may add a 2nd or 3rd harmonic on the same sound if it seems to work. Another approach to tuning drums I learned from Ableton guy Dennis Desantis’s misuse of the Frequency shifter. Using the fine tune can give some great results without ruining the sound.
Sidechaining
Sidechaining can be a godsend for much more than just making that dancefloor “pumping” sound. Used more subtly it can really help sort out places where the low frequencies of the kick drum and bass interfere with eachother. I typically decide whether the low end of the bass or the kick is more important and sidechain the other. By layering an instrument rack you can sidechain only the low frequencies and leave the higher frequencies untouched. This makes the effect much less noticeable but improves the clarity of the mix. I may sidechain the hi hats to the kick for that typical pumping sound as well as atmospherics and reverbs. This can really clean you mix up. Another use is in mixing. Instead of automating one part down everytime another part comes in, I’ll just let the sidechain compressor push the sound down automatically whenever it hears the other sound coming in. I may duck a pad to make a lead or vocal sound more clear. I highly recommend you look into this.
Stab
Then next step I will usually attempt is some sort of Stab sound. Something with a fast attack and decay. This is the part that will play of the drum and bass rhythm. The goal is to get a good sound that cuts through the mix and doesn’t screw up the momentum of the track. For an idea of a stab that really drives a dance song, look no further than Lil Louis – French Kiss. People have been ripping this off for ages because, quite simply, it works! If you have an arpeggiated bassline, you might not need a stab. I’ll usually create a 4 bar stab-like part just so there is a bit of variation in the pattern. Be careful not to lose the hypnotic quality of the part by changing things up too much (unless that is exactly what you are going for).
Pads, stretched tones
I’m a bit lazy when it comes to making pads and they are typically an afterthought even though they can be incredibly important. They give a track that loops alot of movement and keeps the song sounding too clean, which can often make things sound too mechanical or even unprofessional. A great way to get a good pad or drone is to stretch the hell out of a sample or play it on the low note of a sampler. Stretching vocal samples it a favorite of mine. It can sound so good so easily that it almost seems like you’re cheating 
I will typically add delay and long reverb to make it sound nice and wet and to smooth the edges. This is a fantastic way to add some much needed atmosphere and movement to a track. Just make sure you are in the correct key. A simple pad layered with a stretched vocal or sound effect can give you excellent results.
Sometimes chopped up pads can make a very good stab or melodic hook sound if done correctly. Sasha’s – Xpander is a perfect example.
Hook/Lead
At this point in my songwriting I usually have to make a decision. Either let the song cruise along as is without an obvious hook or lead riff, or realize that it would seem lacking without it. In my 30 Day Ableton Journal. I attempted several leads but in the end, decided it was better without them. This is a completely subjective thing as your musical goals might be different than mine. As long as you are using your best judgement and you aren’t just throwing parts in because they are “supposed” to be there, you should be in good shape.
Crashes/effects/reverse/cut ups
This is where I do a bit of filling in the blanks. I’ll usually drop crashes and reverse cymbals in their logical places. Sometimes I just use these as markers to possibly be replaced by another sound. These will usually be placed at 8 or 16 bar intervals. Pretty obvious stuff, but definitely makes a difference. Some artists don’t use crashes at all. Listen to Daft Punk for example. If you can make it work for you, go for it. Personally I’ve tried, but it’s deceptively difficult to do what they do and still keep things interesting.
Once I’ve got the basics crashes and reverse sounds in place, I’ll put atmospheric sounds with a good amount of delay, reverb or both in spots throughout the mix. Especially when a build or breakdown is needed. Without overdoing it, I just filled in the gaps. I check to make sure the intro part of the track isn’t too empty. Although it’s nice to save the good part for later, you don’t want any of your track to be boring. Using cut edits of parts that play later with some delay can give good results, especially if you are lacking hi frequency content.
Structure
This part is always tough for me. I know it shouldn’t be as I’ve been making songs since 1988, but structuring club music can still be challenging. One example of a song structure may look like this:
Intro: 16 Bars
Bass dropp: 16 bars
Added layers and elements: 32 bars
breakdown: 4/8/16 or 32 bars
Full on track with hook or lead: 32 bars
short break: 4/8 or 16 bars
groove with less elements: 16 bars
outro: 16 bars
Although it’s good to have a fairly solid structure, sometimes using odd times can create some nice tension and make your track less predictable. Otherwise, straying from multiples of 4 bars will just sound off. Use your own judgement and don’t be afraid to “borrow” the structure from another song. People have been doing this for ages, it’s not a big deal.
Panning/EQ’ing/Mixing
Next I go through the mixing stage and dial in the panning for each sound. I may add an auto pan or automation to some sounds to give some random movement. This works well on atmospherics while subtle panning is good for drum sounds. I like to use Ableton’s auto filter to give subtle movement as well. I may do a stereo spread of the upper frequencies of the Bass while keeping the subs mono. Keep in mind the panning is also important for sounds with the same frequencies. Often times panning is more effective than EQing to bring out a part’s clarity. Unless I’m going for an artificial sound, I try to avoid extreme EQ’ing. For a more natural sound start with panning and then attenuate unwanted frequencies instead of boosting frequencies. If you are using extreme boosting to try to bring out the bass in a sound, you probably should rework the source sound. You can’t bring out something that isn’t there to begin with.
When it comes to mixing, it’s a good practice to listen to all the other parts besides the one you are mixing. It’s very important to concentrate on how a part effects the totality of your song. If you do find yourself focusing on the part you are mixing, take it to where you think it sounds good and then drop it back about 10-15%. If you don’t get this habit under control, you’ll end up with the newbie mistake of having the first parts you mix buried by the last parts you mix.
Mono mixing
Once I have a basic mix I like to switch to mono. In Ableton it’s easy. Just drop a utility effect on the master track and change the stereo spread to zero. Then turn off 1 of your monitors and get in front of it. I have written a whole blog post of mixing in mono, but in short, mixing in mono reveals phasing issues, if your effects are overdone or if your panning is making a part less clear than it should be. Another great thing is that in mono, there is no “sweet” spot. Wherever you are sitting, you’ll get the same results. If you can get things sounding great in mono, you can be sure it’ll sound excellent when back in stereo. Don’t forget to turn off your utility before mixdown!
Editing for groove
Once I’ve made it this far, the first question I ask myself (when making music for clubs) is “is this danceable? Does this make me want to move or just stand in one place and nod my head”. There is nothing worse than a well produced track that doesn’t move you… or your audience. If I find that it isn’t giving me the results I was hoping for I inspect what part is slowing the track down. I first make sure the drums and bass alone get me excited, then I add parts one by one until the track sounds less danceable. Once I find it, I’ll consider changing the rhythm or even pulling the whole part out. Then I’ll continue adding parts going through the same process. This can be frustrating after all the work you’ve put into each part, but it’s important not to be married to any one part. If it’s not improving your song, it’s making it worse. Also it’s not a bad idea to experiment with groove templates. They can make a pretty drastic difference in the vibe of your song.
Final tweaks
Some of these final tweaks can make the biggest impact on whether your song sounds great or just ok. Typically at this stage I’ve made a pretty safe mix. Everything has it’s place and nothing is taking up too much attention. That’s a good place to be but not a great place to end. It’s important that you let certain parts have their chance to shine, so for each important part, find out where that is. Once you introduce it loud enough to grab the listener’s attention, they will hear it throughout the mix even when it’s lower in volume. These little moments for each instrument gives your song more dynamics and constantly keeps your attention. A little boost goes a long way, so don’t try to make ears bleed here, just make sure the listener knows when something new has arrived.
Once I’ve gone through this process, I’m usually pretty happy with my mix and I mix it down. Of course you want to make sure to burn a CD and play this on a few systems and do some a/b tests with some songs you like the production on and if necessary fine tune your mix. I’ve been known to be “happy” with my mix and still go back 3 or 4 times for final tweaks. Luckily this isn’t all that bothersome because you know you are very close to finished and that’s a great feeling.
Conclusion
Well folks, generally speaking, that’s my process. Everyone has their own approach and all are valid if they work for you. Hopefully this has given you some ideas which I encourage you to borrow or steal.
Happy music making,
Jason
P.S. – Don’t forget to comment & tweet (down below) & “like” (up above).
All your feedback & support is appreciated!
30 Day Ableton Music Production Journal
Welcome to my 30 Day Journal experiment. Below are 3 of the 30 videos available in my full Ableton video collection. Over the course of 30 days I forced myself to record at least 30 minutes of producing everyday journaling my full creative process for 2 songs and a DJ mix. I also show you how to take a song from within or outside of Ableton and prepare it for live performance.
Be aware that due to the volume of video material I’ve recorded (20 or more hours), there are no zooms or tricky video effects. I am also aware that there may be some imperfections & volumes may fluctuate with my voice from video to video. In this case I’m going for a wealth of content instead of perfection. It is recommended that you enlarge this video to fullscreen for best results. Enjoy and please share this with your friends through word of mouth, email, Twitter & Facebook. I’d like to share this free content with as many people as possible.
Day 1 (Song 1 begins)
Day 14 (Song 2 Begins)
Day 27 (DJ mix begins)
Download completed songs & the Mix at the links below(right click and save):
Jason Timothy – DJ Mix August 2010
Final thoughts:
Realize the songs & dj mix were not abandoned at the point of perfection as reaching that can require far more than 30 days. Also be aware that reaching a level of satisfaction instead of perfection may be just the discipline you need. I know many people who spend years on their work and by the time it’s close to perfect, they realized it now sounds outdated to them thus starting the cycle all over again.
At the end of the day, completing your creative works takes a level of skill, patience and most importantly confidence. If you can’t muster the confidence in your work, you’ll never be able to say “This is finished”.
I took a huge gamble when starting this 30 day video journal. I had no idea what I would accomplish, if anything. I had no idea if I would be well received as I stumbled through each day trying to share an honest reflection of my creative process. I knew I would be far from perfect and that I would have several of my weaknesses exposed for all to see.
For me, this was a test of will, persistance and courage. I completed the challenge and I came out alive on the other side. As a sidenote I’ve pushed my comfort zone out quite a bit and have become less resistant to facing my fears. I want to thank you all for the support and the positive feedback. I hope this process has inspired you to have the confidence to create and complete your work.
Special thanks to Nick from NicksTutorials.com for loaning me the space and bandwidth to make this possible. I highly recommend you stop by his site. His Ableton tutorials are fantastic and he has loads of free vids as well.
For those who are interested, all the songfiles, samples and final mixes of the songs available immediately if you decide to order this full collection (you’ll need version 8.1.3). The full collection will soon be priced at $79 but is reduced to $59 for a limited time. (Keep in mind that the songs used for the DJ Mix are not included due to obvious legal reasons).
I hope you enjoyed this 30 day experiement.
Happy Music Making
Jason
P.S. – Don’t forget to comment & tweet (down below) & “like” (up above).
All your feedback & support is appreciated!
.
-
- Sign up to our mailing list now and get:
- * FREE Soft Synths, Drum Synths & Effects!
- * Expert Ableton Tips and tricks
- * Be the first to get blog/video updates
- * Engineering & Creativity tips
- * No B.S.!